• Home
  • About Lani
  • Our Services
    • Electrical Fault Finding
    • Safety Switches & Switchboards
    • Electrical Renovations
    • Lighting Installation, Upgrades & Design >
      • Smart Lighting Installation
      • LED Lighting
      • Feature Lighting Installation
      • Outdoor Lighting Installation
      • Garden Lighting Installation
    • General Electrical Services
    • Smoke Alarm Installation & Replacement
    • Mains upgrades
    • EV Charger Installation
    • Induction Cooktop Installation
    • Pendant Lighting Installation
  • Visit Our Shop
  • Careers
    • Senior A-Grade Electrician Job Melbourne
    • A-Grade Electrician Job Melbourne
  • Blog
  • Contact
Lani The Sparky
  • Home
  • About Lani
  • Our Services
    • Electrical Fault Finding
    • Safety Switches & Switchboards
    • Electrical Renovations
    • Lighting Installation, Upgrades & Design >
      • Smart Lighting Installation
      • LED Lighting
      • Feature Lighting Installation
      • Outdoor Lighting Installation
      • Garden Lighting Installation
    • General Electrical Services
    • Smoke Alarm Installation & Replacement
    • Mains upgrades
    • EV Charger Installation
    • Induction Cooktop Installation
    • Pendant Lighting Installation
  • Visit Our Shop
  • Careers
    • Senior A-Grade Electrician Job Melbourne
    • A-Grade Electrician Job Melbourne
  • Blog
  • Contact

Electrical Tips, Advice and News

Renovating in Collingwood? 10 Electrical Jobs to Plan Before the Walls Close

10/13/2026

0 Comments

 
Renovating in Collingwood often means working with a home that already has plenty of history. Behind original walls and later additions, there may also be decades of electrical changes that are not obvious until work begins.
That is why electrical planning should happen early.

Once plasterboard goes up, cabinetry is fitted, and ceilings are finished, adding wiring or moving electrical points can become much more disruptive. Getting an electrician involved before those stages gives you time to plan how the renovated home will actually function.
​

Lani the Sparky provides residential electrical services for Collingwood renovations and throughout Melbourne’s Inner North. Here are 10 electrical jobs worth discussing before the walls close.

​

Pre-Renovation Electrical Checklist

Before electrical rough-in begins, try to have the following decisions ready:
  • Final cabinetry and kitchen appliance plans
  • Powerpoint locations
  • Lighting and switch locations
  • Oven, cooktop, microwave, and rangehood specifications
  • Dishwasher, fridge and pantry power requirements
  • Under-cabinet or feature lighting
  • Air conditioning plans
  • EV charger requirements
  • Outdoor and security lighting
  • Any major new electrical appliances or equipment
  • ​
Having this information early helps your electrician plan wiring and circuits around the finished layout, rather than making decisions after surfaces are already complete.

​
Picture

1. Check Existing Wiring in Older Collingwood Homes

One reason renovating in Collingwood deserves careful electrical planning is the age and variety of local housing.

Collingwood contains historic cottages, terraces and other older housing alongside renovated and newer properties. The City of Yarra's heritage material documents surviving nineteenth-century housing in the suburb, including cottages dating to the 1870s.

A renovated interior doesn't necessarily mean everything behind the walls was updated at the same time.
Energy Safe Victoria recommends having wiring checked in homes built before the 1980s and notes that insulation around household wiring can deteriorate over time.
​

A renovation provides a valuable opportunity to inspect accessible wiring before it disappears behind newly finished walls.

​If you have flickering lights, damaged powerpoints, unexplained tripping, or other electrical problems, this is also a sensible stage for
electrical fault finding.


2. Plan Powerpoints Around Furniture and Daily Life

Do not decide powerpoint locations based only on what looks symmetrical on a floor plan.

Think about where beds, televisions, desks, lamps and charging devices will actually go.

Home offices may need several accessible outlets. Bedrooms may benefit from power on both sides of the bed. Living rooms may need power behind the television as well as near furniture.
​

Adding an extra power point while the wall is open is generally far less disruptive than deciding you need one after plastering and painting are complete.

​

3. Finalise Kitchen Electrical Requirements

The kitchen deserves particularly detailed planning because so many fixed and portable appliances are concentrated in one area.

Before rough-in, confirm the planned locations and electrical requirements for your:
  • Oven and cooktop
  • Rangehood
  • Dishwasher
  • Refrigerator
  • Microwave
  • Kettle, toaster and coffee machine
  • Pantry appliances
  • Island or peninsula power points
  • Under-cabinet lighting

Island benches need particular attention. If you want power there, incorporate it into the kitchen and electrical plan before installing everything.
​

Appliance specifications also matter. Different cooktops, ovens and other appliances may have different electrical requirements, so choosing major appliances early can help your electrician plan appropriate circuits and connections.

​

4. Plan Lighting and Switches Together

Lighting plans should reflect how each room will actually be used.

Consider preparation lighting in the kitchen, bathroom mirror lighting, hallway lighting and whether living spaces need different lighting options for different activities.

Then think about switches.

Where will you naturally reach when entering or leaving each room? If a space has multiple entrances, would controlling the same lights from different positions be useful?
​

Renovating in Collingwood may also involve rear extensions, courtyards or redesigned entrances. Include outdoor and security lighting in the plan if these areas are changing.

​

5. Plan Air Conditioning Early

If air conditioning is part of the renovation, discuss it before you finish walls and ceilings.

Depending on the system, you may need to coordinate electrical supply and wiring with planned unit locations and other trades.

Early planning also helps avoid situations where you have to disturb finished plasterwork because an electrical requirement was overlooked.
​

Even if installation happens later in the project, tell your electrician what system you're considering during planning.

​

6. Review Safety Switch Protection

A renovation is a useful opportunity to review the home's existing safety switches.

Energy Safe Victoria explains that safety switches monitor electrical flow and quickly disconnect a protected circuit when they detect certain leakage faults.

Older switchboards may not provide the same protection as newer installations, particularly where electrical work has been added at different times.
​

Your electrician can assess the existing setup and determine what changes the renovation requires.

​

7. Check Whether the Switchboard Needs Attention

A new kitchen, additional lighting, extra circuits, air conditioning and other electrical upgrades can place different requirements on the home's electrical system.

That makes the switchboard an important part of renovation planning.

An electrician can assess its age, condition, available capacity, and existing protection before you add substantial new electrical work.

For older Collingwood properties, this assessment can be particularly worthwhile. Energy Safe Victoria identifies older switchboards, especially those without safety switches, as one sign that household electrical infrastructure should be checked.
​

If needed, you can plan a switchboard upgrade alongside the renovation rather than discovering it halfway through.

​
Picture

8. Consider Whether a Mains Upgrade Is Needed

The switchboard is only one part of the electrical picture.

Renovations can introduce induction cooking, larger kitchen appliances, air conditioning, EV charging and other equipment that may increase the home's electrical requirements.

Depending on the existing supply and what you plan to install, you may need to consider a mains upgrade.
​

Not every renovation needs one. The key is to identify the home's expected electrical needs early enough for an electrician to assess the existing infrastructure.

​

9. Include Smoke Alarms in the Plan

Smoke alarms can easily be forgotten while homeowners focus on kitchens, bathrooms, and lighting.

If you open ceilings or change layouts, include smoke alarm installation and existing alarm locations in discussions with your electrician.
​

This lets you consider smoke alarms and related electrical work alongside the rest of the renovation, rather than treating them as a last-minute addition.

​

10. Think About EV Charging

Even if you do not currently own an electric vehicle, think about whether one is likely to be part of your household in the coming years.

If you expect to install an EV charger, tell your electrician while planning the renovation.

Depending on your property, charger location and existing electrical system, preparation may be easier while other electrical work is already underway.
​

For Collingwood homes where parking layouts and access can vary considerably from property to property, thinking about the intended charging location early is particularly useful.

​

Electrical Renovation Timeline

Picture
Good timing can prevent electrical decisions from becoming expensive changes later.

Before Demolition
Walk through the property with your electrician and discuss the renovation plans, existing electrical problems and anything being added, removed or relocated. You can also identify older wiring or switchboard concerns at this stage.

Before Rough-In
Finalise cabinetry, appliances, lighting, switches, powerpoints, air conditioning and other major electrical requirements. Your electrician needs enough information to determine where wiring and circuits will need to go.

Before Walls and Ceilings Close
Review the electrical layout again. Confirm that powerpoints, lighting, switches and appliance connections have been allowed for before access disappears behind plasterboard and other finishes.

During Final Installation
​
Once walls, ceilings, cabinetry, and other finishes are ready, install electrical fittings, switches, powerpoints, and relevant appliances as appropriate.

​

Plan the Electrical Work Before Your Collingwood Renovation Moves Ahead

When renovating in Collingwood, some of the most important decisions happen long before the paint colours and finishing touches.

Older wiring, switchboards and existing electrical infrastructure deserve attention alongside new power points, kitchen appliances, lighting, safety switches, smoke alarms, air conditioning, mains requirements and EV charging.

Getting those decisions made before walls and ceilings close gives your electrician a much better opportunity to plan the work around the finished home.

If you're preparing a Collingwood renovation, contact Lani the Sparky early in the planning process, ideally before electrical rough-in and before walls or ceilings are closed.
​

Contact Lani the Sparky to discuss residential renovation electrical work in Collingwood and Melbourne's Inner North.

​
0 Comments



Leave a Reply.

    View my profile on LinkedIn
Picture
Download our Capability Statement
0423 822 414
[email protected]
REC 31259
ABN
94 634 781 468​


​Marketing & SEO by Shelley Marketing 
  • Home
  • About Lani
  • Our Services
    • Electrical Fault Finding
    • Safety Switches & Switchboards
    • Electrical Renovations
    • Lighting Installation, Upgrades & Design >
      • Smart Lighting Installation
      • LED Lighting
      • Feature Lighting Installation
      • Outdoor Lighting Installation
      • Garden Lighting Installation
    • General Electrical Services
    • Smoke Alarm Installation & Replacement
    • Mains upgrades
    • EV Charger Installation
    • Induction Cooktop Installation
    • Pendant Lighting Installation
  • Visit Our Shop
  • Careers
    • Senior A-Grade Electrician Job Melbourne
    • A-Grade Electrician Job Melbourne
  • Blog
  • Contact